Facade Panels
Available now
Facade Panel – CPF-03
A refined flat-rib composite profile for disciplined architectural geometry.
The CPF-03 is a high-performance exterior cladding solution featuring a measured horizontal groove pattern. Its four-side capped construction provides comprehensive protection against the Australian elements.
Available colours
- Warranty
- 12 years
- Origin
- Overseas Manufacture.
Overview
The reasoning behind the spec.
The Facade Panel CPF-03 is designed for architectural projects that require order and visual restraint. The profile features a horizontal flat-ribbed surface with a repeating groove pattern, creating clean linear geometry across large-scale exterior walls without unnecessary three-dimensional excess. Engineered with a hollow-core profile to reduce structural load, each board is fully encased in a protective cap. This four-side capping ensures moisture resistance and structural integrity at every edge, making it a reliable choice for commercial and residential applications in varied climates.
What sets it apart
Engineered details.
Flat-Rib Geometry
A refined repeating groove pattern that provides a clean, disciplined aesthetic for modern building envelopes.
Four-Side Capped Protection
The composite core is fully encapsulated to prevent moisture ingress and maintain board stability through all Australian seasons.
Hollow-Core Engineering
Reduced weight profile facilitates easier handling and installation for high-coverage facade requirements.
Durable Composite Build
A high-density material selection that resists rot, decay, and environmental degradation over long-term exposure.
Performance
Tested. Rated. Documented.
Every metric below is independently verified. Full test reports and BAL compliance pathways are available with the technical data sheet.
Technical Specification
- Profile Code
- CPF-03
- Composition
- Capped Wood-Plastic Composite (WPC)
- Structure
- Hollow-core flat-rib
- Protection
- Four-side full capping
- Water Resistance
- 100% Waterproof
- Fire Rating
- Compliant with Australian fire safety standards
- Standard Colours
- Birch, Oak, Smoke Gray, Ebony, Charcoal
- Weight
- Reduced weight hollow profile
- Product Code
- CPF-03-BIRCH-UGC1
Warranty
15 Year Limited Residential Warranty; 10 Year Commercial Warranty.
Lead time
Typically 2 to 4 weeks, subject to stock availability.
Origin
Overseas Manufacture.
Certifications
- AS/NZS Fire Rated
- Waterproof Certified
- UV Resistance Tested
Gallery
See it in real spaces.
A closer look at the texture, tone, and finish of this profile across real applications.
Finishes
14 factory finishes.
Custom colour matching available on project quantities of 80sqm and above. All finishes are low VOC and certified for indoor air quality.
Birch
A deep, textured grain pattern emulating natural timber growth.
Oak
A refined combination of wood grain and wire-brushed texture.
Smoke Gray
A contemporary wood grain with a subtle, low-sheen finish.
Walnut
A clean, tactile wire-brushed surface for a matte architectural appearance.
Installation
Detailed for the people who build.
Every order ships with our installation guide, fixing schedule and toolbox talk pack. Site visits available on request across the eastern seaboard.
Book a Site Walk- 01
Substructure Preparation
Ensure the substrate is level and install appropriate battens at specified intervals to allow for ventilation.
- 02
Panel Alignment
Begin installation at the base, ensuring the first CPF-03 panel is perfectly level to maintain the linear groove pattern.
- 03
Mechanical Fastening
Secure panels using the recommended concealed fixing system to allow for natural thermal expansion and contraction.
- 04
Detailing and Trims
Apply matching corner profiles and edge trims to complete the facade and ensure a weather-tight finish.
Typical applications
Where it performs.
Specified across these typologies by Australian architects and developers.
The comparison
How Facade Panel – CPF-03 measures up.
A direct, like-for-like specification read against the typical alternatives on the Australian market.
Teak & Rope
Specification- Four-side capping for total edge protection
- Consistent linear groove geometry
- Hollow core for reduced structural load
- Fully waterproof and fireproof
Typical alternatives
Market- Uncapped or three-side capped boards
- Inconsistent repeat patterns
- Solid heavy profiles difficult to handle
- Standard water resistance
Why it matters
The CPF-03 offers a superior balance of weight and environmental protection compared to standard uncapped composite alternatives.
FAQs
The questions we hear most.
Specify Facade Panel – CPF-03 on your next project.
Order an A4 sample pack, request a project quote, or arrange a meeting with our specification team.
More from Facade Panels
Related profiles
A multi-rib composite facade system defined by deep shadow lines and structural relief.
Facade Panel – CPF-01
Wide-format composite cladding for expansive architectural surfaces.
Facade Panel – CPF-04
Architectural slatted profiles defined by tonal contrast and layered depth.